WS2812B 8-Bit RGB Neopixel LED Ring

WS2812B 8-Bit RGB Neopixel LED Ring.These LED strips are just about the best way to get tons of colorful LED light with a minimum of wiring and fuss! Each element contains a red, green, and blue LED, as well as a tiny WS2812 controller chip. This means that each element is individually addressable and can accept brightness values of 0-255 for each of its LEDs, giving you 24 bits of color precision overall. Each LED is activated by using a special serial data protocol. This protocol allows many LEDs to be daisy chained together so that one microcontroller can control the whole lot – with a single data signal. Any number of these LEDs can be chained together by connecting one module’s data-out (DO) pin to another’s data-in (DI) pin. This LED is compatible with Neopixel & FastLED Arduino Library. >Pack of 1-piece/pack.

Brief Data:

• Ring Inner Diameter ID: Ø14mm.

• Ring Inner Diameter OD: Ø28mm.

• Ring of 8 pieces of 5050 Red, Green and Blue (RGB) LEDs.

• Each LED element is individually addressable with 24-bit color (8 bits each for R, G & B), 16 million colors.

• 3-Wires easy connection, 2-power supply lines and 1 data line.

• Interface: Serial (Shift Register).

• Compatible with Neopixel & FastLED Arduion Library.

• Data Speed: 800Kbps.

• Mounting Hole: 2-position M3 Screw.

• Power Supply: 5V.